126 lines
4.0 KiB
Verilog
126 lines
4.0 KiB
Verilog
//Legal Notice: (C)2023 Altera Corporation. All rights reserved. Your
|
|
//use of Altera Corporation's design tools, logic functions and other
|
|
//software and tools, and its AMPP partner logic functions, and any
|
|
//output files any of the foregoing (including device programming or
|
|
//simulation files), and any associated documentation or information are
|
|
//expressly subject to the terms and conditions of the Altera Program
|
|
//License Subscription Agreement or other applicable license agreement,
|
|
//including, without limitation, that your use is for the sole purpose
|
|
//of programming logic devices manufactured by Altera and sold by Altera
|
|
//or its authorized distributors. Please refer to the applicable
|
|
//agreement for further details.
|
|
|
|
// synthesis translate_off
|
|
`timescale 1ns / 1ps
|
|
// synthesis translate_on
|
|
|
|
// turn off superfluous verilog processor warnings
|
|
// altera message_level Level1
|
|
// altera message_off 10034 10035 10036 10037 10230 10240 10030
|
|
|
|
module niosII_mem (
|
|
// inputs:
|
|
address,
|
|
address2,
|
|
byteenable,
|
|
byteenable2,
|
|
chipselect,
|
|
chipselect2,
|
|
clk,
|
|
clken,
|
|
clken2,
|
|
freeze,
|
|
reset,
|
|
reset_req,
|
|
write,
|
|
write2,
|
|
writedata,
|
|
writedata2,
|
|
|
|
// outputs:
|
|
readdata,
|
|
readdata2
|
|
)
|
|
;
|
|
|
|
parameter INIT_FILE = "niosII_mem.hex";
|
|
|
|
|
|
output [ 31: 0] readdata;
|
|
output [ 31: 0] readdata2;
|
|
input [ 14: 0] address;
|
|
input [ 14: 0] address2;
|
|
input [ 3: 0] byteenable;
|
|
input [ 3: 0] byteenable2;
|
|
input chipselect;
|
|
input chipselect2;
|
|
input clk;
|
|
input clken;
|
|
input clken2;
|
|
input freeze;
|
|
input reset;
|
|
input reset_req;
|
|
input write;
|
|
input write2;
|
|
input [ 31: 0] writedata;
|
|
input [ 31: 0] writedata2;
|
|
|
|
|
|
wire clocken0;
|
|
wire not_clken;
|
|
wire not_clken2;
|
|
wire [ 31: 0] readdata;
|
|
wire [ 31: 0] readdata2;
|
|
wire wren;
|
|
wire wren2;
|
|
assign wren = chipselect & write & clken;
|
|
assign not_clken = ~clken;
|
|
assign not_clken2 = ~clken2;
|
|
assign clocken0 = ~reset_req;
|
|
assign wren2 = chipselect2 & write2 & clken2;
|
|
altsyncram the_altsyncram
|
|
(
|
|
.address_a (address),
|
|
.address_b (address2),
|
|
.addressstall_a (not_clken),
|
|
.addressstall_b (not_clken2),
|
|
.byteena_a (byteenable),
|
|
.byteena_b (byteenable2),
|
|
.clock0 (clk),
|
|
.clocken0 (clocken0),
|
|
.data_a (writedata),
|
|
.data_b (writedata2),
|
|
.q_a (readdata),
|
|
.q_b (readdata2),
|
|
.wren_a (wren),
|
|
.wren_b (wren2)
|
|
);
|
|
|
|
defparam the_altsyncram.address_reg_b = "CLOCK0",
|
|
the_altsyncram.byte_size = 8,
|
|
the_altsyncram.byteena_reg_b = "CLOCK0",
|
|
the_altsyncram.indata_reg_b = "CLOCK0",
|
|
the_altsyncram.init_file = INIT_FILE,
|
|
the_altsyncram.lpm_type = "altsyncram",
|
|
the_altsyncram.maximum_depth = 32768,
|
|
the_altsyncram.numwords_a = 32768,
|
|
the_altsyncram.numwords_b = 32768,
|
|
the_altsyncram.operation_mode = "BIDIR_DUAL_PORT",
|
|
the_altsyncram.outdata_reg_a = "UNREGISTERED",
|
|
the_altsyncram.outdata_reg_b = "UNREGISTERED",
|
|
the_altsyncram.ram_block_type = "AUTO",
|
|
the_altsyncram.read_during_write_mode_mixed_ports = "DONT_CARE",
|
|
the_altsyncram.width_a = 32,
|
|
the_altsyncram.width_b = 32,
|
|
the_altsyncram.width_byteena_a = 4,
|
|
the_altsyncram.width_byteena_b = 4,
|
|
the_altsyncram.widthad_a = 15,
|
|
the_altsyncram.widthad_b = 15,
|
|
the_altsyncram.wrcontrol_wraddress_reg_b = "CLOCK0";
|
|
|
|
//s1, which is an e_avalon_slave
|
|
//s2, which is an e_avalon_slave
|
|
|
|
endmodule
|
|
|