Compare commits

...

5 Commits

19 changed files with 1219 additions and 0 deletions

5
HDL/IP/periodram.qip Normal file
View File

@ -0,0 +1,5 @@
set_global_assignment -name IP_TOOL_NAME "RAM: 2-PORT"
set_global_assignment -name IP_TOOL_VERSION "14.0"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone IV E}"
set_global_assignment -name VERILOG_FILE [file join $::quartus(qip_path) "periodram.v"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "periodram_inst.v"]

214
HDL/IP/periodram.v Normal file
View File

@ -0,0 +1,214 @@
// megafunction wizard: %RAM: 2-PORT%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: altsyncram
// ============================================================
// File Name: periodram.v
// Megafunction Name(s):
// altsyncram
//
// Simulation Library Files(s):
// altera_mf
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
//
// 14.0.2 Build 209 09/17/2014 SJ Full Version
// ************************************************************
//Copyright (C) 1991-2014 Altera Corporation. All rights reserved.
//Your use of Altera Corporation's design tools, logic functions
//and other software and tools, and its AMPP partner logic
//functions, and any output files from any of the foregoing
//(including device programming or simulation files), and any
//associated documentation or information are expressly subject
//to the terms and conditions of the Altera Program License
//Subscription Agreement, the Altera Quartus II License Agreement,
//the Altera MegaCore Function License Agreement, or other
//applicable license agreement, including, without limitation,
//that your use is for the sole purpose of programming logic
//devices manufactured by Altera and sold by Altera or its
//authorized distributors. Please refer to the applicable
//agreement for further details.
// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
module periodram (
clock,
data,
rdaddress,
wraddress,
wren,
q);
input clock;
input [31:0] data;
input [3:0] rdaddress;
input [1:0] wraddress;
input wren;
output [7:0] q;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_off
`endif
tri1 clock;
tri0 wren;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_on
`endif
wire [7:0] sub_wire0;
wire [7:0] q = sub_wire0[7:0];
altsyncram altsyncram_component (
.address_a (wraddress),
.address_b (rdaddress),
.clock0 (clock),
.data_a (data),
.wren_a (wren),
.q_b (sub_wire0),
.aclr0 (1'b0),
.aclr1 (1'b0),
.addressstall_a (1'b0),
.addressstall_b (1'b0),
.byteena_a (1'b1),
.byteena_b (1'b1),
.clock1 (1'b1),
.clocken0 (1'b1),
.clocken1 (1'b1),
.clocken2 (1'b1),
.clocken3 (1'b1),
.data_b ({8{1'b1}}),
.eccstatus (),
.q_a (),
.rden_a (1'b1),
.rden_b (1'b1),
.wren_b (1'b0));
defparam
altsyncram_component.address_aclr_b = "NONE",
altsyncram_component.address_reg_b = "CLOCK0",
altsyncram_component.clock_enable_input_a = "BYPASS",
altsyncram_component.clock_enable_input_b = "BYPASS",
altsyncram_component.clock_enable_output_b = "BYPASS",
altsyncram_component.intended_device_family = "Cyclone IV E",
altsyncram_component.lpm_type = "altsyncram",
altsyncram_component.numwords_a = 4,
altsyncram_component.numwords_b = 16,
altsyncram_component.operation_mode = "DUAL_PORT",
altsyncram_component.outdata_aclr_b = "NONE",
altsyncram_component.outdata_reg_b = "UNREGISTERED",
altsyncram_component.power_up_uninitialized = "FALSE",
altsyncram_component.read_during_write_mode_mixed_ports = "DONT_CARE",
altsyncram_component.widthad_a = 2,
altsyncram_component.widthad_b = 4,
altsyncram_component.width_a = 32,
altsyncram_component.width_b = 8,
altsyncram_component.width_byteena_a = 1;
endmodule
// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: ADDRESSSTALL_A NUMERIC "0"
// Retrieval info: PRIVATE: ADDRESSSTALL_B NUMERIC "0"
// Retrieval info: PRIVATE: BYTEENA_ACLR_A NUMERIC "0"
// Retrieval info: PRIVATE: BYTEENA_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_ENABLE_A NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_ENABLE_B NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_SIZE NUMERIC "8"
// Retrieval info: PRIVATE: BlankMemory NUMERIC "1"
// Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_A NUMERIC "0"
// Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_B NUMERIC "0"
// Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_A NUMERIC "0"
// Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_B NUMERIC "0"
// Retrieval info: PRIVATE: CLRdata NUMERIC "0"
// Retrieval info: PRIVATE: CLRq NUMERIC "0"
// Retrieval info: PRIVATE: CLRrdaddress NUMERIC "0"
// Retrieval info: PRIVATE: CLRrren NUMERIC "0"
// Retrieval info: PRIVATE: CLRwraddress NUMERIC "0"
// Retrieval info: PRIVATE: CLRwren NUMERIC "0"
// Retrieval info: PRIVATE: Clock NUMERIC "0"
// Retrieval info: PRIVATE: Clock_A NUMERIC "0"
// Retrieval info: PRIVATE: Clock_B NUMERIC "0"
// Retrieval info: PRIVATE: IMPLEMENT_IN_LES NUMERIC "0"
// Retrieval info: PRIVATE: INDATA_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: INDATA_REG_B NUMERIC "0"
// Retrieval info: PRIVATE: INIT_FILE_LAYOUT STRING "PORT_B"
// Retrieval info: PRIVATE: INIT_TO_SIM_X NUMERIC "0"
// Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
// Retrieval info: PRIVATE: JTAG_ENABLED NUMERIC "0"
// Retrieval info: PRIVATE: JTAG_ID STRING "NONE"
// Retrieval info: PRIVATE: MAXIMUM_DEPTH NUMERIC "0"
// Retrieval info: PRIVATE: MEMSIZE NUMERIC "128"
// Retrieval info: PRIVATE: MEM_IN_BITS NUMERIC "0"
// Retrieval info: PRIVATE: MIFfilename STRING ""
// Retrieval info: PRIVATE: OPERATION_MODE NUMERIC "2"
// Retrieval info: PRIVATE: OUTDATA_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: OUTDATA_REG_B NUMERIC "0"
// Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0"
// Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_MIXED_PORTS NUMERIC "2"
// Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_A NUMERIC "3"
// Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_B NUMERIC "3"
// Retrieval info: PRIVATE: REGdata NUMERIC "1"
// Retrieval info: PRIVATE: REGq NUMERIC "1"
// Retrieval info: PRIVATE: REGrdaddress NUMERIC "1"
// Retrieval info: PRIVATE: REGrren NUMERIC "1"
// Retrieval info: PRIVATE: REGwraddress NUMERIC "1"
// Retrieval info: PRIVATE: REGwren NUMERIC "1"
// Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
// Retrieval info: PRIVATE: USE_DIFF_CLKEN NUMERIC "0"
// Retrieval info: PRIVATE: UseDPRAM NUMERIC "1"
// Retrieval info: PRIVATE: VarWidth NUMERIC "1"
// Retrieval info: PRIVATE: WIDTH_READ_A NUMERIC "32"
// Retrieval info: PRIVATE: WIDTH_READ_B NUMERIC "8"
// Retrieval info: PRIVATE: WIDTH_WRITE_A NUMERIC "32"
// Retrieval info: PRIVATE: WIDTH_WRITE_B NUMERIC "8"
// Retrieval info: PRIVATE: WRADDR_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: WRADDR_REG_B NUMERIC "0"
// Retrieval info: PRIVATE: WRCTRL_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: enable NUMERIC "0"
// Retrieval info: PRIVATE: rden NUMERIC "0"
// Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
// Retrieval info: CONSTANT: ADDRESS_ACLR_B STRING "NONE"
// Retrieval info: CONSTANT: ADDRESS_REG_B STRING "CLOCK0"
// Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_A STRING "BYPASS"
// Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_B STRING "BYPASS"
// Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_B STRING "BYPASS"
// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
// Retrieval info: CONSTANT: LPM_TYPE STRING "altsyncram"
// Retrieval info: CONSTANT: NUMWORDS_A NUMERIC "4"
// Retrieval info: CONSTANT: NUMWORDS_B NUMERIC "16"
// Retrieval info: CONSTANT: OPERATION_MODE STRING "DUAL_PORT"
// Retrieval info: CONSTANT: OUTDATA_ACLR_B STRING "NONE"
// Retrieval info: CONSTANT: OUTDATA_REG_B STRING "UNREGISTERED"
// Retrieval info: CONSTANT: POWER_UP_UNINITIALIZED STRING "FALSE"
// Retrieval info: CONSTANT: READ_DURING_WRITE_MODE_MIXED_PORTS STRING "DONT_CARE"
// Retrieval info: CONSTANT: WIDTHAD_A NUMERIC "2"
// Retrieval info: CONSTANT: WIDTHAD_B NUMERIC "4"
// Retrieval info: CONSTANT: WIDTH_A NUMERIC "32"
// Retrieval info: CONSTANT: WIDTH_B NUMERIC "8"
// Retrieval info: CONSTANT: WIDTH_BYTEENA_A NUMERIC "1"
// Retrieval info: USED_PORT: clock 0 0 0 0 INPUT VCC "clock"
// Retrieval info: USED_PORT: data 0 0 32 0 INPUT NODEFVAL "data[31..0]"
// Retrieval info: USED_PORT: q 0 0 8 0 OUTPUT NODEFVAL "q[7..0]"
// Retrieval info: USED_PORT: rdaddress 0 0 4 0 INPUT NODEFVAL "rdaddress[3..0]"
// Retrieval info: USED_PORT: wraddress 0 0 2 0 INPUT NODEFVAL "wraddress[1..0]"
// Retrieval info: USED_PORT: wren 0 0 0 0 INPUT GND "wren"
// Retrieval info: CONNECT: @address_a 0 0 2 0 wraddress 0 0 2 0
// Retrieval info: CONNECT: @address_b 0 0 4 0 rdaddress 0 0 4 0
// Retrieval info: CONNECT: @clock0 0 0 0 0 clock 0 0 0 0
// Retrieval info: CONNECT: @data_a 0 0 32 0 data 0 0 32 0
// Retrieval info: CONNECT: @wren_a 0 0 0 0 wren 0 0 0 0
// Retrieval info: CONNECT: q 0 0 8 0 @q_b 0 0 8 0
// Retrieval info: GEN_FILE: TYPE_NORMAL periodram.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL periodram.inc FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL periodram.cmp FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL periodram.bsf FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL periodram_inst.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL periodram_bb.v FALSE
// Retrieval info: LIB_FILE: altera_mf

8
HDL/IP/periodram_inst.v Normal file
View File

@ -0,0 +1,8 @@
periodram periodram_inst (
.clock ( clock_sig ),
.data ( data_sig ),
.rdaddress ( rdaddress_sig ),
.wraddress ( wraddress_sig ),
.wren ( wren_sig ),
.q ( q_sig )
);

132
HDL/dec.sv Normal file
View File

@ -0,0 +1,132 @@
module dec
#(m = 8)
(
//clock and reset
input logic clk, clrn,
//control slave
input logic ctl_wr, ctl_rd,
input logic ctl_addr,
input logic [31:0] ctl_wrdata,
output logic [31:0] ctl_rddata,
//memory slave
input logic ram_wr,
input logic [1:0] ram_addr,
input logic [31:0] ram_wrdata,
//external ports
input logic train,
output logic red, yellow, green
);
logic run;
logic [1:0] divider;
logic [m-1:0] divisor;
logic [1:0] contr;
logic [2:0] colors;
logic [m-1:0] cntdiv;
logic enacnt;
//control slave logic
always_ff @ (posedge clk or negedge clrn)
begin
if (!clrn)
begin
run <= 0;
divider <= 0;
end
else
begin
if (ctl_wr)
begin
case (ctl_addr)
1'b0: run <= ctl_wrdata[0];
1'b1: divider <= ctl_wrdata[1:0];
endcase
end
end
end
always_comb
begin
case (ctl_addr)
1'b0: ctl_rddata = {31'b0,run};
1'b1: ctl_rddata = {30'b0,divider};
default: ctl_rddata = 'bx;
endcase
end
//semaphore logic
always_ff @ (posedge clk or negedge clrn)
begin
if (!clrn) cntdiv<=0;
else
begin
if (train | ~run) cntdiv<=0;
else
begin
if (enacnt) cntdiv<=0;
else cntdiv<=cntdiv+1;
end
end
end
always_comb
begin
enacnt=(cntdiv==divisor);
end
always_ff @ (posedge clk or negedge clrn)
begin
if (!clrn)
begin
colors <= 3'b100;
end
else
begin
if (train | ~run)
begin
colors <= 3'b100;
end
else
begin
if (enacnt)
begin
case (colors)
3'b100: colors <= 3'b010;
3'b010: colors <= 3'b011;
3'b011: colors <= 3'b001;
3'b001: colors <= 3'b001;
default: colors <= 3'b100;
endcase
end
end
end
end
always_comb
begin
case (colors)
3'b100: contr = 2'b00;
3'b010: contr = 2'b01;
3'b011: contr = 2'b10;
3'b001: contr = 2'b11;
default : contr = 2'b00;
endcase
end
assign red = colors[2];
assign yellow = colors[1];
assign green = colors[0];
periodram b2v_inst3(
.clock(clk),
.data (ram_wrdata),
.wraddress (ram_addr),
.wren (ram_wr),
.rdaddress({divider,contr}),
.q(divisor)
);
endmodule

19
Testbench/dec/.gitignore vendored Normal file
View File

@ -0,0 +1,19 @@
*.pdf
*.rpt
*.bak
.#*
/db
/incremental_db
/output_files
/simulation
/.qsys*
# /atom_netlists
/testbenches/*.bak
/common_uart/*.bak
/build/*
!/build/*.pdf
!/build/tikz*.sty

67
Testbench/dec/dec.qsf Normal file
View File

@ -0,0 +1,67 @@
# -------------------------------------------------------------------------- #
#
# Copyright (C) 2018 Intel Corporation. All rights reserved.
# Your use of Intel Corporation's design tools, logic functions
# and other software and tools, and its AMPP partner logic
# functions, and any output files from any of the foregoing
# (including device programming or simulation files), and any
# associated documentation or information are expressly subject
# to the terms and conditions of the Intel Program License
# Subscription Agreement, the Intel Quartus Prime License Agreement,
# the Intel FPGA IP License Agreement, or other applicable license
# agreement, including, without limitation, that your use is for
# the sole purpose of programming logic devices manufactured by
# Intel and sold by Intel or its authorized distributors. Please
# refer to the applicable agreement for further details.
#
# -------------------------------------------------------------------------- #
#
# Quartus Prime
# Version 18.1.0 Build 625 09/12/2018 SJ Lite Edition
# Date created = 16:14:06 October 18, 2022
#
# -------------------------------------------------------------------------- #
#
# Notes:
#
# 1) The default values for assignments are stored in the file:
# dec_assignment_defaults.qdf
# If this file doesn't exist, see file:
# assignment_defaults.qdf
#
# 2) Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus Prime software
# and any changes you make may be lost or overwritten.
#
# -------------------------------------------------------------------------- #
set_global_assignment -name FAMILY "Cyclone IV E"
set_global_assignment -name DEVICE EP4CE6E22A7
set_global_assignment -name TOP_LEVEL_ENTITY dec
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 18.1.0
set_global_assignment -name PROJECT_CREATION_TIME_DATE "16:14:06 OCTOBER 18, 2022"
set_global_assignment -name LAST_QUARTUS_VERSION "18.1.0 Lite Edition"
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
set_global_assignment -name MIN_CORE_JUNCTION_TEMP "-40"
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 125
set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1
set_global_assignment -name NOMINAL_CORE_SUPPLY_VOLTAGE 1.2V
set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim-Altera (SystemVerilog)"
set_global_assignment -name EDA_TIME_SCALE "1 ps" -section_id eda_simulation
set_global_assignment -name EDA_OUTPUT_DATA_FORMAT "SYSTEMVERILOG HDL" -section_id eda_simulation
set_global_assignment -name EDA_TEST_BENCH_ENABLE_STATUS TEST_BENCH_MODE -section_id eda_simulation
set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "23 MM HEAT SINK WITH 200 LFPM AIRFLOW"
set_global_assignment -name POWER_BOARD_THERMAL_MODEL "NONE (CONSERVATIVE)"
set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top
set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
set_global_assignment -name QIP_FILE ../../HDL/IP/periodram.qip
set_global_assignment -name SYSTEMVERILOG_FILE ../../HDL/dec.sv
set_global_assignment -name SYSTEMVERILOG_FILE dec_tb.sv
set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top
set_global_assignment -name EDA_NATIVELINK_SIMULATION_TEST_BENCH dec_tb -section_id eda_simulation
set_global_assignment -name EDA_TEST_BENCH_NAME dec_tb -section_id eda_simulation
set_global_assignment -name EDA_DESIGN_INSTANCE_NAME NA -section_id dec_tb
set_global_assignment -name EDA_TEST_BENCH_MODULE_NAME dec_tb -section_id dec_tb
set_global_assignment -name EDA_TEST_BENCH_FILE dec_tb.sv -section_id dec_tb

BIN
Testbench/dec/dec.qws Normal file

Binary file not shown.

128
Testbench/dec/dec_tb.sv Normal file
View File

@ -0,0 +1,128 @@
`timescale 1 ns/1 ns
module dec_tb();
// Wires and variables to connect to UUT (unit under test)
logic clk, clrn, train;
logic r, y, g;
logic [1:0] div;
logic ctl_wr, ctl_rd;
logic ctl_addr;
logic [31:0] ctl_wrdata;
logic [31:0] ctl_rddata;
logic ram_wr;
logic [1:0] ram_addr;
logic [31:0] ram_wrdata;
logic [31:0] divisor[3:0] = {
{8'd10, 8'd70, 8'd50, 8'd20},
{8'd10, 8'd30, 8'd40, 8'd30},
{8'd10, 8'd30, 8'd10, 8'd100},
{8'd10, 8'd60, 8'd80, 8'd50}
};
// Instantiate UUT
dec my_sem(
.clk(clk), .clrn(clrn),
.ctl_wr(ctl_wr), .ctl_rd(ctl_rd),
.ctl_addr(ctl_addr), .ctl_wrdata(ctl_wrdata), .ctl_rddata(ctl_rddata),
.ram_wr(ram_wr),
.ram_addr(ram_addr), .ram_wrdata(ram_wrdata),
.train(train), .red(r), .yellow(y), .green(g)
);
// Clock definition
initial begin
clk = 0;
forever #10 clk = ~clk;
end
// Divisor and train definition
initial begin
//initial reset
clrn = 0;
div = 0;
train = 0;
//take reset off
@(negedge clk) clrn = 1;
//configure semaphore
for (int i=0; i<4; i++) write_ram_transaction(i,divisor[i]); //write divisor RAM
write_reg_transaction(1,div); //write initial divisor
write_reg_transaction(0,1); //enable semaphore
//run trains
repeat (4)
begin
repeat (10) @(posedge clk);
train=1;
repeat (4) @(posedge clk);
train=0;
wait ({r,y,g}==3'b001);
repeat (10) @(posedge clk);
write_reg_transaction(1,div);
div=div+1;
end
//wait a little
repeat (10) @(posedge clk);
$stop;
end
//Single register write transaction task
task write_reg_transaction;
//input signals
input [1:0] offs;
input [31:0] val;
//transaction implementation
begin
@(posedge clk);
//assert signals for one clock cycle
ctl_wr = 1;
ctl_addr = offs;
ctl_wrdata = val;
@(posedge clk);
//deassert signals
ctl_wr = 0;
ctl_addr = 'bx;
ctl_wrdata = 'bx;
end
endtask
//Single register read transaction task
task read_reg_transaction;
//input signals
input [1:0] offs;
output [31:0] val;
//transaction implementation
begin
@(posedge clk);
//assert signals for one clock cycle
ctl_rd = 1;
ctl_addr = offs;
@(posedge clk);
val = ctl_rddata;
//deassert signals
ctl_rd = 0;
ctl_addr = 'bx;
end
endtask
//RAM write transaction task
task write_ram_transaction;
//input signals
input [1:0] offs;
input [31:0] val;
//transaction implementation
begin
@(posedge clk);
//assert signals for one clock cycle
ram_wr = 1;
ram_addr = offs;
ram_wrdata = val;
@(posedge clk);
//deassert signals
ram_wr = 0;
ram_addr = 'bx;
ram_wrdata = 'bx;
end
endtask
endmodule

30
Testbench/dec/semafor.qpf Normal file
View File

@ -0,0 +1,30 @@
# -------------------------------------------------------------------------- #
#
# Copyright (C) 2018 Intel Corporation. All rights reserved.
# Your use of Intel Corporation's design tools, logic functions
# and other software and tools, and its AMPP partner logic
# functions, and any output files from any of the foregoing
# (including device programming or simulation files), and any
# associated documentation or information are expressly subject
# to the terms and conditions of the Intel Program License
# Subscription Agreement, the Intel Quartus Prime License Agreement,
# the Intel FPGA IP License Agreement, or other applicable license
# agreement, including, without limitation, that your use is for
# the sole purpose of programming logic devices manufactured by
# Intel and sold by Intel or its authorized distributors. Please
# refer to the applicable agreement for further details.
#
# -------------------------------------------------------------------------- #
#
# Quartus Prime
# Version 18.1.0 Build 625 09/12/2018 SJ Lite Edition
# Date created = 16:14:06 October 18, 2022
#
# -------------------------------------------------------------------------- #
QUARTUS_VERSION = "18.1"
DATE = "16:14:06 October 18, 2022"
# Revisions
PROJECT_REVISION = "dec"

35
Testbench/dec/wave.do Normal file
View File

@ -0,0 +1,35 @@
onerror {resume}
quietly WaveActivateNextPane {} 0
add wave -noupdate /dec_tb/clk
add wave -noupdate /dec_tb/clrn
add wave -noupdate /dec_tb/train
add wave -noupdate /dec_tb/r
add wave -noupdate /dec_tb/y
add wave -noupdate /dec_tb/g
add wave -noupdate /dec_tb/div
add wave -noupdate /dec_tb/ctl_wr
add wave -noupdate /dec_tb/ctl_rd
add wave -noupdate /dec_tb/ctl_addr
add wave -noupdate /dec_tb/ctl_wrdata
add wave -noupdate /dec_tb/ctl_rddata
add wave -noupdate /dec_tb/ram_wr
add wave -noupdate /dec_tb/ram_addr
add wave -noupdate /dec_tb/ram_wrdata
TreeUpdate [SetDefaultTree]
WaveRestoreCursors {{Cursor 1} {3346003 ps} 0}
quietly wave cursor active 1
configure wave -namecolwidth 150
configure wave -valuecolwidth 100
configure wave -justifyvalue left
configure wave -signalnamewidth 0
configure wave -snapdistance 10
configure wave -datasetprefix 0
configure wave -rowmargin 4
configure wave -childrowmargin 2
configure wave -gridoffset 0
configure wave -gridperiod 1
configure wave -griddelta 40
configure wave -timeline 0
configure wave -timelineunits ns
update
WaveRestoreZoom {0 ps} {15928500 ps}

19
Top/.gitignore vendored Normal file
View File

@ -0,0 +1,19 @@
*.pdf
*.rpt
*.bak
.#*
/db
/incremental_db
/output_files
/simulation
/.qsys*
# /atom_netlists
/testbenches/*.bak
/common_uart/*.bak
/build/*
!/build/*.pdf
!/build/tikz*.sty

388
Top/niosII.qsys Normal file

File diff suppressed because one or more lines are too long

59
Top/niosII/niosII.bsf Normal file
View File

@ -0,0 +1,59 @@
/*
WARNING: Do NOT edit the input and output ports in this file in a text
editor if you plan to continue editing the block that represents it in
the Block Editor! File corruption is VERY likely to occur.
*/
/*
Copyright (C) 2018 Intel Corporation. All rights reserved.
Your use of Intel Corporation's design tools, logic functions
and other software and tools, and its AMPP partner logic
functions, and any output files from any of the foregoing
(including device programming or simulation files), and any
associated documentation or information are expressly subject
to the terms and conditions of the Intel Program License
Subscription Agreement, the Intel Quartus Prime License Agreement,
the Intel FPGA IP License Agreement, or other applicable license
agreement, including, without limitation, that your use is for
the sole purpose of programming logic devices manufactured by
Intel and sold by Intel or its authorized distributors. Please
refer to the applicable agreement for further details.
*/
(header "symbol" (version "1.1"))
(symbol
(rect 0 0 224 144)
(text "niosII" (rect 98 -1 118 11)(font "Arial" (font_size 10)))
(text "inst" (rect 8 128 20 140)(font "Arial" ))
(port
(pt 0 72)
(input)
(text "clk_clk" (rect 0 0 27 12)(font "Arial" (font_size 8)))
(text "clk_clk" (rect 4 61 46 72)(font "Arial" (font_size 8)))
(line (pt 0 72)(pt 80 72)(line_width 1))
)
(port
(pt 0 112)
(input)
(text "reset_reset_n" (rect 0 0 56 12)(font "Arial" (font_size 8)))
(text "reset_reset_n" (rect 4 101 82 112)(font "Arial" (font_size 8)))
(line (pt 0 112)(pt 80 112)(line_width 1))
)
(drawing
(text "clk" (rect 65 43 148 99)(font "Arial" (color 128 0 0)(font_size 9)))
(text "clk" (rect 85 67 188 144)(font "Arial" (color 0 0 0)))
(text "reset" (rect 51 83 132 179)(font "Arial" (color 128 0 0)(font_size 9)))
(text "reset_n" (rect 85 107 212 224)(font "Arial" (color 0 0 0)))
(text " system " (rect 189 128 426 266)(font "Arial" ))
(line (pt 80 32)(pt 144 32)(line_width 1))
(line (pt 144 32)(pt 144 128)(line_width 1))
(line (pt 80 128)(pt 144 128)(line_width 1))
(line (pt 80 32)(pt 80 128)(line_width 1))
(line (pt 81 52)(pt 81 76)(line_width 1))
(line (pt 82 52)(pt 82 76)(line_width 1))
(line (pt 81 92)(pt 81 116)(line_width 1))
(line (pt 82 92)(pt 82 116)(line_width 1))
(line (pt 0 0)(pt 224 0)(line_width 1))
(line (pt 224 0)(pt 224 144)(line_width 1))
(line (pt 0 144)(pt 224 144)(line_width 1))
(line (pt 0 0)(pt 0 144)(line_width 1))
)
)

7
Top/niosII/niosII.cmp Normal file
View File

@ -0,0 +1,7 @@
component niosII is
port (
clk_clk : in std_logic := 'X'; -- clk
reset_reset_n : in std_logic := 'X' -- reset_n
);
end component niosII;

8
Top/niosII/niosII_bb.v Normal file
View File

@ -0,0 +1,8 @@
module niosII (
clk_clk,
reset_reset_n);
input clk_clk;
input reset_reset_n;
endmodule

5
Top/niosII/niosII_inst.v Normal file
View File

@ -0,0 +1,5 @@
niosII u0 (
.clk_clk (<connected-to-clk_clk>), // clk.clk
.reset_reset_n (<connected-to-reset_reset_n>) // reset.reset_n
);

View File

@ -0,0 +1,13 @@
component niosII is
port (
clk_clk : in std_logic := 'X'; -- clk
reset_reset_n : in std_logic := 'X' -- reset_n
);
end component niosII;
u0 : component niosII
port map (
clk_clk => CONNECTED_TO_clk_clk, -- clk.clk
reset_reset_n => CONNECTED_TO_reset_reset_n -- reset.reset_n
);

30
Top/semafor.qpf Normal file
View File

@ -0,0 +1,30 @@
# -------------------------------------------------------------------------- #
#
# Copyright (C) 2018 Intel Corporation. All rights reserved.
# Your use of Intel Corporation's design tools, logic functions
# and other software and tools, and its AMPP partner logic
# functions, and any output files from any of the foregoing
# (including device programming or simulation files), and any
# associated documentation or information are expressly subject
# to the terms and conditions of the Intel Program License
# Subscription Agreement, the Intel Quartus Prime License Agreement,
# the Intel FPGA IP License Agreement, or other applicable license
# agreement, including, without limitation, that your use is for
# the sole purpose of programming logic devices manufactured by
# Intel and sold by Intel or its authorized distributors. Please
# refer to the applicable agreement for further details.
#
# -------------------------------------------------------------------------- #
#
# Quartus Prime
# Version 18.1.0 Build 625 09/12/2018 SJ Lite Edition
# Date created = 16:34:55 October 18, 2022
#
# -------------------------------------------------------------------------- #
QUARTUS_VERSION = "18.1"
DATE = "16:34:55 October 18, 2022"
# Revisions
PROJECT_REVISION = "semafor"

52
Top/semafor.qsf Normal file
View File

@ -0,0 +1,52 @@
# -------------------------------------------------------------------------- #
#
# Copyright (C) 2018 Intel Corporation. All rights reserved.
# Your use of Intel Corporation's design tools, logic functions
# and other software and tools, and its AMPP partner logic
# functions, and any output files from any of the foregoing
# (including device programming or simulation files), and any
# associated documentation or information are expressly subject
# to the terms and conditions of the Intel Program License
# Subscription Agreement, the Intel Quartus Prime License Agreement,
# the Intel FPGA IP License Agreement, or other applicable license
# agreement, including, without limitation, that your use is for
# the sole purpose of programming logic devices manufactured by
# Intel and sold by Intel or its authorized distributors. Please
# refer to the applicable agreement for further details.
#
# -------------------------------------------------------------------------- #
#
# Quartus Prime
# Version 18.1.0 Build 625 09/12/2018 SJ Lite Edition
# Date created = 16:34:55 October 18, 2022
#
# -------------------------------------------------------------------------- #
#
# Notes:
#
# 1) The default values for assignments are stored in the file:
# semafor_assignment_defaults.qdf
# If this file doesn't exist, see file:
# assignment_defaults.qdf
#
# 2) Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus Prime software
# and any changes you make may be lost or overwritten.
#
# -------------------------------------------------------------------------- #
set_global_assignment -name FAMILY "Cyclone IV E"
set_global_assignment -name DEVICE EP4CE115F29C7
set_global_assignment -name TOP_LEVEL_ENTITY semafor
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 18.1.0
set_global_assignment -name PROJECT_CREATION_TIME_DATE "16:34:55 OCTOBER 18, 2022"
set_global_assignment -name LAST_QUARTUS_VERSION "18.1.0 Lite Edition"
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85
set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1
set_global_assignment -name NOMINAL_CORE_SUPPLY_VOLTAGE 1.2V
set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim-Altera (SystemVerilog)"
set_global_assignment -name EDA_TIME_SCALE "1 ps" -section_id eda_simulation
set_global_assignment -name EDA_OUTPUT_DATA_FORMAT "SYSTEMVERILOG HDL" -section_id eda_simulation